Yellow Gold - Chrome Powder

£12.00 GBP

A warm gold chrome that can exquisitely elevate any manicure. Burnish on top of Take Me to Tulum for a zingy, metallic yellow look.

  • 2g of loose chrome powder
  • Mirror chrome effect
  • Use more product for full mirrored finish, less product to show chosen gel colour layer underneath
  • Applicators sold separately
  • Place pot underneath each nail during application to catch loose chrome and avoid wastage
  • For best results use with Hyper Shine Top Coat

For a full coverage chrome nail:

  1. Apply one coat of Hyper Shine Top Coat to the entire nail and cure.
  2. Using Brush M or sponge applicator, dip the tip into the chrome powder and then burnish the cured top coat with a gentle rubbing motion.
  3. Gently sweep away any excess chrome with a dusting brush, being careful not to dislodge anything that has been securely burnished.
  4. Encapsulate the chrome with a liberal slick of Rubber Base (we recommend decanting some to ensure no chrome gets put back in the bottle!) and cure before finally top coating.

For chrome detailing and nail art:

  1. Wipe away the tacky inhibition layer of the cured background with a lint-free pad soaked in alcohol, before gently buffing the entire surface to remove any shine.
  2. Using Hyper Shine Top Coat, paint each nail with your chosen design that is going to be chromed and cure
  3. Using Brush M or sponge applicator, dip the tip into the chrome powder and then burnish the cured top coat with a gentle rubbing motion.
  4. Gently sweep away any excess chrome with a dusting brush, being careful not to dislodge anything that has been securely burnished.
  5. Encapsulate the chrome with a liberal slick of Rubber Base (we recommend decanting some to ensure no chrome gets put back in the bottle!) and cure before finally top coating.
    Ingredients & Cautions

    This product contains HEMA, do not use on those with a HEMA or acrylate sensitivity.

    Always wear non permeable, nitrile gloves when handling any UV gel product.

    Only apply to healthy nails.

    Apply in thin coats, do not overload the brush. Thick coats of product will not cure sufficiently. The more pigmented the colour, the thinner the coat should be.

    Avoid all contact with skin. If contact with skin occurs, remove immediately.

    Do not cure nails with product on the skin.

    Use a 48W UV/LED lamp with a minimum of 365 + 400 nanometers to cure. Cure each coat for 60 seconds. If hands are removed from the lamp during curing, always make up lost seconds with another round of curing. It is not possible to over cure this product.

    Remove gloves using a 'no touch method' i.e. do not pull from the fingertips where you could touch transferred product, pull down from the wrist, turning the glove inside out and dispose of in general waste. Always use a fresh pair of gloves for each client.

    Always wash both yours and client's hands after application of final top coat and before use of cuticle oil.

    Our products are for use by qualified nail professionals only.

    Ingredients:

    Di-HEMA Trimethylhexyl Dicarbamate, HEMA, Hydroxypropyl Methacrylate, Ethyl Trimethybenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone,
    May Contain (+/-) CI 77266, CI 77891, CI 73360, CI 15880, CI 74160, CI 74260, CI 19140, CI 60725,
    CI 77007, Aluminium Powder, Mica (CI 77019)

    Curing Information

    Use a 48W UV/LED lamp with a minimum of 365 + 405 nanometers to cure. Cure each coat for 60 seconds. If hands are removed from the lamp during curing, always make up lost seconds with another round of curing. It is not possible to over cure this product.

    We recommend the range SunUV lamps as our gels have been fully tested with these lamps.

    PAT test your lamp annually and check daily that all bulbs are in good working order and free from cured gel residue.

    Application Guides

    Proper application of UV gel polish is crucial to achieving that perfect long-lasting manicure and more importantly, preventing allergies and infections. Download our handy application guide to ensure you're getting the most from our products!

    We advise curing our gel colour, glitters and BUILD & BOOST™ in a 48W UV/LED lamp with a minimum of 365 nanometers to ensure all products are fully cured. It is also recommended that our BUILD & BOOST™ range is cured in a 99 second low heat mode to help prevent heat spikes and ensure the product is completely cured.

    Aftercare

    - Finish with TWENTY Glass No-Wipe Top Coat

    - Use a cuticle oil daily to prevent lifting and chipping

    - Avoid swimming and hot tubs for 48 hours after application

    - Use gloves when cleaning with harsh chemicals to protect nails

    - Do not pick at polish, this may cause damage to the natural nail.

    - Do not use nails as tools, this can cause damage to the natural nail.

    Shipping & Delivery

    We begin preparing your goods as soon as your order is received. All orders are shipped within 24 hours of your order being placed (Monday - Friday).

    Delivery Prices:

    UK Mainland:

    1 - 3 business days - £5.99

    Northern Ireland / Republic of Ireland:

    1 - 3 business days - £7.99

    UK Mainland / Northern Ireland / Republic of Ireland orders over £150:

    1 - 3 business days - Free

    Europe:

    2 - 11 business days - £12.99

    Europe orders over £200:

    2 - 11 business days - Free

    USA:

    1 - 3 business days - $7.99

    USA orders over $150:

    1 - 3 business days - Free

    Rest of the World:

    3 - 17 business days - £24.99

    Rest of the World orders over £200:

    3-17 business days - Free

    *Please note, local customs charges may apply.

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)